![Comparison of Operating Principles: This figure illustrates a microscopic comparison of the surface waviness and residual scallop height generated by a face milling cutter and a ball-nose cutter under different stepover and step-down settings. [Figure 4-1]](https://6-cnc.com/wp-content/uploads/2026/06/image-2-1024x680.png)
Compare face milling and peripheral milling by cutting action, tooling, surface direction, material removal and part applications.
Face Milling vs Peripheral Milling: Process and Application Differences Read More »
Plan slot milling with practical guidance for cutter choice, slot width, depth, chip control, tolerances and inspection.
Slot Milling: Tool Choice, Width and Depth Guidelines Read More »
Choose CNC internal corner radii that fit standard tools, reduce chatter and lower machining cost without compromising part function.
Internal Corner Radius in CNC Milling: A Practical Guide Read More »
Learn what makes a CNC pocket deep, how reach affects chatter and accuracy, and how to design deep pockets for stable, cost-effective machining.
Deep Pocket CNC Milling: Design Limits and Cost Drivers Read More »
Design CNC milled parts with practical guidance for walls, pockets, internal radii, setups, tolerances and cost-effective inspection.
CNC Milling Design Guide: Walls, Pockets, Radii and Setups Read More »
A buyer’s guide to PEEK CNC machining in China, covering industrial and semiconductor grades, material traceability, tolerances, annealing, cleanliness, inspection, and supplier qualification.
PEEK CNC Machining China: Parts, Grades & Supplier Guide Read More »
Learn how much CNC machining costs, typical hourly-rate ranges, how shops calculate part prices, major cost drivers, and practical ways to reduce cost.
CNC Machining Cost Guide: Prices, Hourly Rates & Calculation Read More »
Engineering guide to machined connector contacts: Swiss turning and mill-turn geometry, C110/C145/C360 selection, tolerances, runout, surface finish, plating allowance, burr control, and inspection.
Connector Contact Machining: Tolerances, Materials and Plating Allowances Read More »
Technical analysis of surface roughness (Ra) in CNC milling and turning. Includes material Ra charts, toolpath stepover effects, and abrasive finishing triggers.
Surface Finish Ranges: Turned Shafts vs Milled Faces Read More »
Technical guide to achievable CNC milling and turning tolerances in prototyping. Includes industry tolerance tables, tool deflection mitigation, and DFM rules.
Realistic CNC Tolerances: Milling vs Turning for Prototypes Read More »
